Free Patterns for Scroll Saw – Casserole Dish-Sized Trivets
Use longer blanks to make larger trivets
By Ron Forsyth in Scroll Saw Woodworking Magazine, Fall 2015
When I was having dinner with a neighbor one night, she served a casserole hot from the oven. To protect the table, she positioned two trivets side by side, which inspired me to make trivets large enough to hold a casserole dish. However, without gluing up blanks, it’s difficult to find wood more than 7-3/4″ (197mm) wide. I decided to design patterns that use longer, rather than wider, wood to accommodate casserole dishes. Scroll down below to unlock your free scroll saw trivet patterns!
Find more patterns in the new 2019 Scroll Saw Woodworking Magazine! Click here to get your copy.
Making the Trivets
Cover the wood with blue painter’s tape and attach the pattern to the tape. Drill blade-entry holes and cut the inside frets. I cut the perimeter last, especially if the design has a round outline (see Tip). Use a 1/4″ (6mm)-radius roundover bit in a router or laminate trimmer (a smaller, less expensive version of a router) to round the outside edges of the trivet. Then, sand the trivet and remove the sanding dust. Finally, dip the trivet in an oil finish, such as salad bowl finish, to seal the wood and accentuate the grain.
Fall 2019 Scroll Saw Woodworking & Crafts Magazine
The fall issue 2019 of Scroll Saw Woodworking & Crafts is here! From fretwork and whirligigs to intarsia and puzzles, scroll saw it all in new fall issue #76 – only $7.99!
- 24 step-by-step projects for all skill levels
- Full-size ready-to-use patterns, from an easy bald eagle whirligig and Jack-o’-lantern alphicons to challenging fretwork instruments and intarsia dragon
- Shop-tested product reviews, expert tips, and online extras Get dozens of scroll saw patterns when you subscribe – a $100 value yours free! Get 4 Issues for 1 Year delivered directly to your doorstep for only $19.99 – Click here to Subscribe today!
Cutting Corners Tip
I usually cut the perimeter of the trivet last, especially if it’s round. If you cut it first, you lose the corners, which are useful for leverage when guiding the wood through the saw blade. When you are cutting, you are usually watching the blade, not where you are grabbing the piece to turn it. If there are no corners, it is easy to grab a fragile part of the design and break it. This is especially true when you are doing nature scenes. I have broken many leaves and flowers when cutting other parts of the trivet.
More scroll saw patterns from the fall 2019 magazine:
Kindhearted Dragon by Judy Gale Roberts
Making a Flat Puzzle from Scratch by Judy and Dave Peterson
Timless Red Rose by Anatoly Obelets
Halloween Word Art by Kaylee Schofield, Danielle Schagrin, and John Deck
Get Exclusive Email Offers And Receive 15% OFF On Your First Book Order!
Recent Comments